Two circuits metered from one DIN-mounted unit, each through its own 100 A clamp. Bidirectional, so generation and consumption both read correctly, and reporting over Wi-Fi to the platform without a gateway in between.
A compact DIN-mounted meter that clamps onto two circuits and reports straight to the platform over Wi-Fi. Useful where a solar feed and a load need watching on the same board.
Clamp one channel on the inverter output and the other on the incomer. The difference between them is what the building used from its own roof, and that is the number an installer's customer actually asks for.
Two sub-circuits leaving the same board, a workshop and an office say, can share a unit. Both channels reference the same voltage, so it suits split loads on one phase rather than two separate supplies.
The clamps open, so the meter goes on without isolating anything during a short visit. It is the one to choose when a fiscal-grade reading is not required and the time on site is tight.
Your logo and product name on the housing and the packaging, and your details on the setup portal an installer sees.
Custom firmware for whatever the two channels have to mean on your site, and a dashboard on your domain rather than a generic portal.
Installation and clamp-orientation guides in your name — the two things that get fitted backwards on site if nobody writes them down.
Tell us how many boards, how many circuits on each and what the data has to reach. We will size the clamps and quote per unit.
