A single-phase, single-channel energy meter one DIN module wide. It measures a circuit through a 100 A current transformer and reports over Wi-Fi to the platform. Class B accuracy, the same class as a billing meter.
One module wide, Class B accurate and reporting over Wi-Fi — so a circuit can be metered without a cable run back to a panel. Where there is no usable network on site, it pairs with the IESG-R250, which provides the Wi-Fi and the route to the platform.
A managed building with one supply and several tenants. One meter per tenant circuit, Class B accurate, so the split is fair and defensible. Where invoices must rest on a legally approved meter, ask us for the MID-certified build of the same unit.
A compressor, a cold room, a heat pump. One meter on its feed shows when it runs, how hard and for how long, which is usually enough to see a fault a week before it becomes a call-out.
Where the building's Wi-Fi reaches the board and lets devices out to the internet, the meter joins it directly and nothing else is needed. Where it does not, or where site IT would rather not be involved, the IESG-R250 gives it a network of its own.
Your logo and product name on the meter label and the packaging, and your details on anything the end customer reads.
Reporting interval, units and platform credentials set before it ships, plus a dashboard on your domain rather than a generic portal.
Installation instructions and a CT sizing guide in your name, written for the electrician who will actually fit it.
Tell us how many circuits and whether the readings have to be billable. We will confirm the CT sizing, set the reporting up and quote per unit.
