A three-phase power meter for the incomer or a three-phase machine, reporting over Wi-Fi. Four DIN modules, split-core CTs or flexible Rogowski coils plugged in on one lead, and everything from per-phase power factor to harmonics, on the same board as the single-phase units.
One meter on the three-phase supply gives the number every other reading is measured against: total demand, per-phase balance, power factor and how clean the supply is. It joins the same Wi-Fi as the IEMTR-EM165-W, usually from an IESG-R250, so a whole board reports through one router. For sites without Wi-Fi there is the IEMTR-EM4423-L.
A three-phase supply into a workshop, a farm or a commercial unit. The meter on the incomer gives total kW, kWh and power factor per phase, which is the baseline every other reading on the site is compared against.
Compressors, chillers, pumps and CNC machines on their own three-phase feed. Phase imbalance and power factor are visible per machine, which is where motor and bearing problems first show.
Industrial units where one supply feeds several tenants. MID approved, so the readings can go on an invoice, with the single-phase meters picking up the smaller tenants.
Your logo and product name on the label and the packaging, and your details on anything the end customer reads.
Wiring type, CT set, reporting and platform credentials set before it ships, plus a dashboard on your domain rather than a generic portal.
Installation instructions and a CT and Rogowski selection guide in your name, written for the electrician who will fit it.
Tell us the supply size and whether it is cable or busbar. We will pick CTs or coils to suit, set the wiring type and quote per unit.
